HIKVISION DS-K1T802M - Editing User

Access Control Terminal·User Manual
20
The valid length of the password is 1 to 8 characters.
7. If the password registration is not required, click the # key to return to the Add
User interface.
6.1.2 Editing User
Steps:
1. Move the cursor to Edit User by using direction keys on the user
management interface.
2. Click the # key to enter the managing user interface.
Figure 6-8 User Editing Interface
3. Swipe the card or enter the card No. .
4. Click the # key to enter the password settings interface.
1) Move the cursor to Change PWD to enter the password changing
interface.
2) Enter a new password.
3) Confirm the new password.
4) Click the # key to confirm the settings.
Figure 6-9 Password Changing Interface
5. If the password is not required, click the # key to clear the configured
password.
6. Change the valid date
You can set the valid date (start/end date) of the card.