HIKVISION DS-K2802 Quick Start Guide

DS-K2800 Serial Access Controller
v
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the
following tips:
• Ensure unit is installed in a well-ventilated, dust-free environment.
• Keep all liquids away from the device.
• Ensure environmental conditions meet factory specifications.
• Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a
result of dropping it may cause damage to the sensitive electronics within the unit.
• Use the device in conjunction with an UPS if possible.
• Power down the unit before connecting and disconnecting accessories and peripherals.
• A factory recommended HDD should be used for this device.
• Improper use or replacement of the battery may result in hazard of explosion. Replace
with the same or equivalent type only. Dispose of used batteries according to the
instructions provided by the manufacturer.
Safety Information
Signs
Description
Warning
Follow these safeguards to prevent
serious injury or death.
Note
Follow these precautions to prevent
potential injury or material damage.
Tips
The additional information as a
complimentary of the contents.
Warnings:
Please adopt the power adapter from the legitimate factory which can meet the safety extra
low voltage (SELV) standard.
Do not install, wiring, or uninstall when the power is still on.

HIKVISION DS-K2802 Specifications

General

Product type	Access controller
Certification	CE, FCC
Compatibility	Wiegand
Mounting type	Wall
Product color	Black
Brand compatibility	Hikvision
Operating temperature (T-T)	-20 - 65 °C
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	285 mm
Width	237 mm
Height	69 mm