Need help?Do you have a question about the HIKVISION DS-K2601 and is the answer not in the manual?
General| Product type | Access controller |
|---|---|
| Certification | CE, FCC |
| Product color | Gray |
| Brand compatibility | Hikvision |
| Operating temperature (T-T) | -20 - 65 °C |
Weight and Dimensions| Depth | 370 mm |
|---|---|
| Width | 345 mm |
| Height | 90 mm |
Details the scope and applicability of the user manual for the access controller.
Details FCC compliance, rules, and conditions for operating the device.
Covers EU conformity, WEEE, and battery disposal directives for the product.
States compliance with Industry Canada ICES-003 standards for the device.
Provides essential warnings and notes for safe installation, operation, and handling of the device.
Details the DS-K2600's architecture, processor, network capabilities, and storage.
Illustrates the DS-K2604 component layout and provides a description of each part.
Details the terminal layout and pin assignments for the DS-K2601 model.
Details the terminal layout and pin assignments for the DS-K2602 model.
Details the terminal layout and pin assignments for the DS-K2604 model.
Diagrams for connecting external terminals for card readers across different models.
Illustrates wiring for Wiegand and RS485 card readers, including LED/buzzer control.
Guides for installing E-locks, alarm devices, and door buttons with wiring diagrams.
Details for connecting magnetic sensors, power supply, and integrating arming/fire alarm modules.
Procedure for initializing the access controller hardware to default settings via dial-up.
Details on configuring lock and alarm relay outputs for normally open and normally closed states.
Overview of the client software workflow for managing access control functions.
Step-by-step guide to activating the access controller using SADP software.
Instructions for activating the access controller through the client management software.
To Next Page