Need help?Do you have a question about the HIKVISION DS-KC001 and is the answer not in the manual?
General| Model | DS-KC001 |
|---|---|
| Relay Output | 1 |
| Card Reading Mode | Mifare |
| Card Reading Distance | ≤ 5 cm |
| Max. Event Capacity | 100000 |
| Reader Interface | 1 |
| Alarm Input | 1 |
| Alarm Output | 1 |
| Power Supply | DC 12V |
| Working Temperature | -10°C to 55°C |
| Working Humidity | 10% to 90% (non-condensing) |
| Bluetooth | No |
Technical specifications for the DS-K1T671TM-3XF temperature screening terminal.
Guidelines for choosing an optimal location for device installation.
Diagram and explanation of wiring connections for the terminal.
Step-by-step guide for mounting the terminal on a wall.
Procedure for upgrading terminal and MCU firmware.
Configuration options for temperature detection and alarms.
Using iVMS-4200 for face and temperature monitoring.
Remote configuration of access control parameters via iVMS-4200.
Configuring alarm linkage rules in iVMS-4200.
To Next Page