Need help?Do you have a question about the HIKVISION DS-K1T803MF and is the answer not in the manual?
General| Type | Basic access control reader |
|---|---|
| Product color | Black |
| Cards capacity | 3000 cards |
| Fingerprint reader | Yes |
| Authentication type | Access chip/card, Biometric, Password |
| Fingerprint sensor type | Optical |
| False Rejection Rate (FRR) | 0.01 % |
| False Acceptance Rate (FAR) | 0.001 % |
| Access chip/card reader type | Contactless |
| Contactless working distance | 50 mm |
| International Protection (IP) code | IP42 |
| PC connected | - |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Display type | TFT-LCD |
| Display diagonal | 2.4 \ |
| Maximum resolution | 320 x 240 pixels |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Front camera | No |
| DC current (max) | 1 A |
Weight and Dimensions| Depth | 37 mm |
|---|---|
| Width | 76.5 mm |
| Height | 205 mm |
Lists critical precautions to prevent serious injury or death.
Lists precautions to prevent potential injury or material damage.
Guides on activating the device using SADP or client software.
Instructions for accessing the device's main interface and admin login.
Covers settings for network, system, time, and Wiegand parameters.
Details on adding, editing, deleting, and searching users.
Configuration of access parameters, holidays, week plans, and schedules.
Setup for departments, shifts, holidays, and attendance schedules.
Manages controllers, including adding, editing, and deleting devices.
To Next Page