Fingerprint Access Control Terminal
8
Login 4.2
Steps:
1. For the first time login, hold the OK key for 3s to enter the main interface. You can manage the
user, the access control, the attendance, the communication, the system, etc.
Main Interface Figure 4. 11
If you have configured the admin in the User interface:
1) Long-press the OK key to enter the Admin Login interface.
2) Enter the admin ID No. and password, scan the fingerprint or swipe the card to enter the
main interface.
Admin Login Interface Figure 4. 12
Parameters Configuration 4.3
4.3.1 Communication Settings
Purpose:
You can set the network parameters, the Wiegand parameters and the Wi-Fi.