HIKVISION DS-K1T803MF User Manual

Fingerprint Access Control Terminal
3
Chapter 4 Basic Operation
Suggested working flow:
Working Flow Figure 4. 1
Device Activation: Activate the device before first using.
Login: Hold the OK button for 3s to login the device main interface.
Parameters Configuration: Configure the communication, the system, and the time.
User Management: Add, edit and delete the users in the fingerprint access control terminal. You are
able to set the user ID No. name, card number fingerprint, password, department, etc.
Access Control Configuration: Configure the access control parameters and control the door status.
Attendance Configuration: Configure the attendance parameters and control the users attendance.
Note: The device has configured the default department, the default shift, the default shift schedule and
the default system information. You are able to use the device directly after adding the user.
Device Activation 4.1
Purpose:
You should activate the device before the first login. After powering on, the system will switch to activate
notifying interface.
Activation Notifying Interface Figure 4. 2
Activation via SADP and activation via the iVMS-4200 Client Software are supported.
The default values of the terminal are as follows:
 The default IP address: 192.0.0.64
 The default port No.: 8000
 The default user name: admin
4.1.1 Activating via SADP Software
Purpose:
SADP software is used for detecting the online device, activating the device, and resetting the device
password.

HIKVISION DS-K1T803MF Specifications

General

Type	Basic access control reader
Product color	Black
Cards capacity	3000 cards
Fingerprint reader	Yes
Authentication type	Access chip/card, Biometric, Password
Fingerprint sensor type	Optical
False Rejection Rate (FRR)	0.01 %
False Acceptance Rate (FAR)	0.001 %
Access chip/card reader type	Contactless
Contactless working distance	50 mm
International Protection (IP) code	IP42
PC connected	-
Ethernet LAN data rates	10, 100 Mbit/s
Display type	TFT-LCD
Display diagonal	2.4 \
Maximum resolution	320 x 240 pixels
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Front camera	No
DC current (max)	1 A

Weight and Dimensions

Depth	37 mm
Width	76.5 mm
Height	205 mm