Fingerprint Access Control Terminal
84
5.4.2 Shift Management
Click Shift tab to enter the shift management interface.
There are two kinds of shifts in this interface: Normal Shift, and Man-Hour Shift.
Normal Shift
Setting Attendance Rule
Steps:
1. Click Attendance Rule to set the rule for the attendance management.
2. Click to pop up the following dialog box.
3. Set a rule name.
4. Set detailed parameters for the attendance rule according to actual needs.
5. Click to save the rule.
6. (Optional) You can edit or delete the rule by clicking or .
Notes:
After deleting the rule, the normal attendance shift which has enabled the rule will be deleted as
well.
If the shift which has enabled the rule has already set the shift schedule, the shift will not be
deleted.
Setting Attendance Shift
Steps:
1. Click Attendance Shift to set the normal attendance shift.