Fingerprint Access Control Terminal
98
5. (Optional) Right click on a group in the Group list and to select a door status for the group.
Notes:
If the status is selected as Remain Open/Remain Closed, the door will keep open/ closed until a
new anti-control command being made.
The function of picture capturing cannot be realized until the storage server is installed.
Do not support the Capture function.
Access Status
The door status will be represented instantly by the change of icon on the Access Information panel if
the access event is triggered or an anti-control command is made.
Note: The attendance device does not support the function.
Real-Time Event
You can check the Real-time information of the access event on this panel. Click More to enter the
Access Event page to view more event information.
5.5.2 Access Control Event
Purpose:
You can view real-time access event (such as swiping to open the door, unrecognized card number,
duration group error, etc.) information in this section.
Click the icon on the control panel to enter the interface.
To Next Page
Loading...
