Fingerprint Access Control Terminal
15
Time Settings Interface Figure 4. 24
3. Press the ESC key and select Yes to save the settings and exit the interface.
User Management 4.4
Purpose:
You are able to add, edit, delete and search the user.
Move the cursor to User in the main interface and press the OK key to enter the User List interface.
User List Interface Figure 4. 25
4.4.1 Adding User
You can add users by editing the ID No., the user name, the card No. You can also scan the user
fingerprint, set the password, the department, the role, the schedule template, the authentication mode
and the duress card.
Steps:
1. Press the key to enter the New (new user) interface and input the ID No.
Notes:
The ID No. refers to the user attendance serial No.
The ID No. should be between 1 and 99999999 and should not start with 0.
The ID No. can be used for once.
By default, the ID No. will be increased in sequence.
To Next Page
Loading...
