Need help?Do you have a question about the HIKVISION DS-K1T804A Series and is the answer not in the manual?
General| Model | DS-K1T804A Series |
|---|---|
| Category | IP Access Controllers |
| Audio Prompt | Yes |
| Event Capacity | 100, 000 |
| Display Type | LCD |
| Display Operation Method | Touch screen |
| Audio Input | Built-in microphone |
| Audio Output | Built-in speaker |
| Communication | TCP/IP, RS-485 |
| Network Interface | 10/100M Ethernet |
| Card Type | EM card |
| Fingerprint Recognition Duration | <1 second |
| FAR (False Acceptance Rate) | ≤ 0.001% |
| Wiegand | Wiegand output |
| Output Interface | 1 relay output |
| Supported Readers | RS-485 reader, Wiegand reader |
| Operating Temperature | -10°C to 55°C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Installation | Wall mounting |
Precautions to prevent serious injury or death. Neglecting these can lead to severe consequences.
Precautions to prevent potential injury or equipment damage. Neglecting these can cause minor harm.
Details the terminal diagrams and their connection points for various functions.
Activates the device and modifies its IP address using the SADP tool over LAN.
Guides on activating the device through the client software interface.
Guides on adding an administrator user with details like username, card, and fingerprint.
Explains how to log in to the device as an administrator to manage its settings.
Configures network parameters such as IP address, subnet mask, and gateway.
Sets Wiegand direction and mode for communication with card readers.
Guides on adding new persons with their details, credentials, and access control properties.
Configures basic personal details for users, including name, gender, and contact information.
Configures parameters like authentication modes, door contact status, and timeouts.
Creates access groups to define user access to doors based on templates and schedules.
Manages normal and man-hour shifts, setting attendance rules and checking times.
Manually corrects, edits, deletes, searches, or exports check-in/out records.
Generates and exports attendance reports based on calculated attendance data.
Adds devices to the client software via IP/domain, IP segment, or EHome account.
Sets access control properties for persons, like visitor or super user status.
Remotely controls door status, including opening, closing, or remaining open/closed.
Controls door status remotely via the Hik-Connect mobile client application.
Changes the super password for the access control device used by the mobile client.
To Next Page