HIKVISION DS-K1T804A Series User Manual

Note
•
All persons can enter the main page by entering the
device password to operate if there is no admin user
congured.
•
Aer conguring the admin, you should authencate the
admin to enter the main page.
•
You can use the USB interface to import the user
informaon. For details, see Data Transfer.
3.
Press ESC, and select Yes to save the sengs and exit the page.
7.5.2 Manage Person (Search/Edit/Delete)
Search, edit, delete the added users. You can also manage added
ngerprints, manage user's cards.
Search User
Move the cursor and select User → User to enter the user list.
Enter the user's name or employee ID in the search box, and
press OK to start search.
Edit User
Move the cursor and select User → User to enter the user list.
Select an user in the list and press OK.
Select Edit User and refer to Add Person to edit the user's
informaon.
Press ESC, and select Yes to save the sengs.
Delete
You can delete user, delete password, clear
ngerprint, and clear
card.
Delete User
Delete the selected user.
Clear FP
Clear the all added ngerprints of the selected user.
Clear Card
Delete all added cards of the selected user.
7.6 Access Control
Congure the access control permission, including the access
control parameters, the holiday group, the week plan and the
schedule template.
7.6.1 Access Control
Conguraon Flow
The suggested conguraon ow is as follows:
Figure 7-6 Work Flow
ACS (Access Control Parameters)
Set the device's access control parameters, including the
device authencaon, the sub reader authencaon, the door
contact status, the open
duraon, the door-open meout
19

HIKVISION DS-K1T804A Series Specifications

General

Brand	HIKVISION
Model	DS-K1T804A Series
Category	IP Access Controllers
Language	English