HIKVISION DS-K1T804A Series User Manual

parameters, including event source and
linkage target.
8.7 Door Control
In Monitoring module, you can view the real-me status of the
doors managed by the added access control device. You can also
control the doors such as open/close the door, or remain the
door open/closed via the client remotely. The
real-me access
event are displayed in this module. You can view the access
details and person details.
Note
For the user with door control permission, the user can enter the
Monitoring module and control the door. Or the icons used for
control will not show. For seng the user permission, refer to
Person Management.
8.7.1 Control Door Status
You can control the status for a single door, including opening
door, closing door, remaining the door open, and remaining the
door closed.
Steps
1.
Click Monitoring to enter the status monitoring page.
2.
Select an access point group on the upper-right corner.
Note
For managing the access point group, refer to Group
Management in the user manual of the client soware.
The doors in the selected access control group will display.
3.
Click a door icon to select a door, or press Ctrl and select
mulple doors.
4.
Click the following
buons to control the door.
Open Door
When the door is locked, unlock it and it will be open for
once.
Aer the open duraon, the door will be closed and
locked again automacally.
Close Door
When the door is unlocked, lock it and it will be closed. The
person who has the access authorizaon can access the
door with
credenals.
Remain Open
The door will be unlocked (no maer closed or open). All the
persons can access the door with no credenals required.
Remain Closed
The door will be closed and locked. No person can access
the door even if he/she has the authorized
credenals,
except the super users.
Capture
Capture a picture manually.
73

HIKVISION DS-K1T804A Series Specifications

General

Brand	HIKVISION
Model	DS-K1T804A Series
Category	IP Access Controllers
Language	English