Enter the device user name. By default, the user name is
admin.
Password
Enter the device password.
Cauon
The password strength of the device can be automacally
checked. We highly recommend you change the password of
your own choosing (using a minimum of 8 characters,
including at least three kinds of following categories: upper
case leers, lower case leers, numbers, and special
characters) in order to increase the security of your product.
And we recommend you change your password regularly,
especially in the high security system, changing the
password monthly or weekly can
beer protect your
product.
Proper
conguraon of all passwords and other security
sengs is the responsibility of the installer and/or end-user.
6.
Oponal: Check Synchronize Time to synchronize the device
me with the PC running the client aer adding the device to
the client.
7.
Oponal: Check Import to Group to create a group by the
device name.
Note
You can import all the channels of the device to the
corresponding group by default.
8.
Finish adding the device.
-
Click Add to add the device and back to the device list page.
-
Click Add and New to save the
sengs and connue to add
other device.
9.
Perform the following
operaons aer adding the devices.
Remote
Conguraon
Click on Operaon column to set
remote conguraon of the
corresponding device.
Note
•
For some models of devices, you can
open its web window. To open the
original remote conguraon window,
press Ctrl and click
.
•
For detail operaon steps for the
remote conguraon, see the user
manual of the device.
Device Status
Click on Operaon column to view
device status.
8.1.3 Add Devices by IP Segment
If you want to add devices of which the IP addresses are within an
IP segment, you can specify the start IP address and end IP
address, user name, password, and other parameters to add
them.
42