5.
Edit the week schedule to apply it to the template.
1) Click Week Schedule tab on the lower panel.
2) Select a day of the week and draw me duraon(s) on the
meline bar.
Note
Up to 8 me duraon(s) can be set for each day in the week
schedule.
3) Oponal: Perform the following operaons to edit the me
duraons.
•
Move the cursor to the me duraon and drag the me
duraon on the meline bar to the desired posion when
the cursor turns to .
•
Click the me duraon and directly edit the start/end me
in the appeared dialog.
•
Move the cursor to the start or the end of me duraon and
drag to lengthen or shorten the me duraon when the
cursor turns to .
4) Repeat the two steps above to draw more me duraons on
the other days of the week.
6.
Add a holiday to apply it to the template.
Note
Up to 4 holidays can be added to one template.
1) Click Holiday tab.
2) Select a holiday in the le list and it will be added to the
selected list on the right panel.
3)
Oponal: Click Add to add a new holiday.
Note
For details about adding a holiday, refer to Add Holiday.
4) Oponal: Select a selected holiday in the right list and click
to remove the selected one, or click Clear to clear all the
selected holiday(s) in the right list.
7.
Click Save to save the
sengs and nish adding the template.
8.4 Set Access Group to Assign Access
Authorizaon to Persons
Aer adding the person and conguring the person's credenals,
you can create the access groups to dene which person(s) can
get access to which door(s) and then apply the access group to
the access control device to take
eect.
Steps
•
For one person, you can add up to 4 access groups to one
access control point of one device.
•
You can add up to 128 access groups in total.
•
When the access group
sengs are changed, you need to
apply the access groups to the devices again to take eect. The
access group changes include changes of template, access
group
sengs, person's access group sengs, and related
person details (including card number, ngerprint, linkage
57