Parameters in the user manual of client
soware for details.
8.8.3 Search Historical Events
In the Event Search module of the event center page, you can
search the historical events via me, device type, and other
condions according to the specied device type, and then
process the events.
Before You Start
Enable receiving events from devices before the client can receive
event
informaon from the device,see Enable Receiving Events
from Devices for details.
Steps
1.
Click Event Center → Event Search to enter the event search
page.
Figure 8-8 Search History Event
2.
Set the lter condions to display the required events only.
Time
The client me when the event starts.
Search by
Group: Search the events occurred on the resources in the
selected group.
Device: Search the events occurred on the selected device.
Device Type
The type of device that occurred the event.
All
All the device types, and you can set the following lter
condions: group, priority, and status.
Video Intercom
For the events of video intercom, you need to select
searching scope: All Record and Only Unlocking.
•
All Records: You can
lter the events from all the video
intercom events, and you need to set the following
lter
condions: device, priority, status.
•
Only Unlocking: You can
lter the events from all the video
intercom unlocking events, and you need to set the
following
lter condions: device, unlocking type.
Access Control
For the events of access control, you can set the following
lter condions: device, priority, status, event type, card
reader type, person name, card no., organizaon.
77
To Next Page
Loading...
Need help?
General
