Need help?Do you have a question about the HIKVISION DS-K1T804BMF and is the answer not in the manual?
General| Model | DS-K1T804BMF |
|---|---|
| Type | IP Access Controller |
| Operation System | Linux |
| Display Type | LCD touch screen |
| Operation Method | Touchscreen |
| Pixel | 2 MP |
| Audio Input | Built-in Microphone |
| Audio Output | Built-in Speaker |
| RS-485 | Yes |
| Output Button | 1 |
| Door Contact Input | 1 |
| Alarm Input | 1 |
| Alarm Output | 1 |
| Lock Output | 1 |
| Event Capacity | 100, 000 |
| Face Recognition Accuracy Rate | > 99% |
| Face Anti-Spoofing | Yes |
| Linked Camera | Yes |
| Access Control | Yes |
| Time Synchronization | NTP |
| Working Humidity | 10% to 90% |
| Installation | Wall Mounting |
| Video Standard | H.264 |
| Wired Network | 10/100 Mbps |
| Network Interface | Ethernet |
| Wiegand | 26/34 bit |
| Card Type | Mifare, EM |
| Face Recognition Distance | 0.3 m to 1.5 m |
| Power Supply | 12V DC |
| Working Temperature | -10°C to 55°C |
| Application Situation | Indoor |
Safeguards to prevent serious injury or death.
Precautions to prevent potential injury or material damage.
Checks and requirements before starting the installation process.
Step-by-step guide for installing the device.
Steps to activate the device using its on-screen interface.
Procedure for activating the device using the SADP software.
Steps to activate the device using the client software.
Adding, searching, editing, and deleting person information.
Configuring access control parameters, schedules, and templates.
Setting attendance status, managing time and attendance.
Exporting and importing device data.
Methods for adding devices to the client application.
Managing user information within the client software.
Setting up schedules and templates for access control.
Defining access permissions using access groups.
To Next Page