HIKVISION DS-K1T804BMF - Chapter 7 Local Settings; Language and Administrator Setup

Chapter 7 Local Sengs
7.1 Select Language
You can select a language for the device system.
Aer the device acvaon, you can select a language for the device system.
By default, the system language is English.
Note
Aer you change the system language, the device will reboot automacally.
7.2 Add Administrator
Aer the device acvaon and system language selecon, you are required to add an
administrator. You can set the administrator's user name, the card No. You can also add the user
ngerprint, set the department, the template, the authencaon mode, and the role.
Steps
1. Move the cursor and select User → New to enter the New page.
DS-K1T804B Series Fingerprint Access Control Terminal User Manual
15