HIKVISION DS-K1T804BMF - Export Attendance Report

7.8.6 Export Aendance Report
Export the aendance record, the aendance report, the abnormal aendance record and the
aendance management schedule.
Steps
1. Plug in a USB
ash drive in the USB interface.
Note
• The supported USB
ash drive format is FAT32.
• The USB ash drive memory should be from 1G to 32G. Make sure the free space of the USB
ash drive is more than 512 M.
2. Move the cursor and select Report. Press OK to enter the Report page.
Figure 7-27 Report Page
3. Select a report to export.
-
When
exporng aendance record, aendance report, and abnormal aendance record,
you should enter the device No.
aendance start date and end date.
Note
The device No. is for dierenang the reports of dierent devices.
-
When selecng Aendance Management Schedule, shi sengs table, normal shi
schedule table and the man-hour shi schedule table will be exported.
Note
For details about the exported tables descripons, see Aendance Report Table .
The exported table will be saved in the USB ash drive in Excel format.
DS-K1T804B Series Fingerprint Access Control Terminal User Manual
46