HIKVISION DS-K1T804BMF - Chapter 10 Mobile Client Configuration; Control Door Status

Chapter 10 Mobile Client Conguraon
Aer adding the access control device to the mobile client, you can control door status, set door
open
duraon, change super password, and view access control logs.
Get Hik-Connect Mobile Client from the following ways:
• Visit
hps://appstore.hikvision.com to download the applicaon according to your mobile
phone system.
• Visit the
ocial website of our company. Then go to Support → Tool → Hikvision App Store to
download the applicaon according to your mobile phone system.
• Scan the QR code below to download the
applicaon.
Figure 10-1 Hik-Connect QR Code
10.1 Control Door Status
The Mobile Client allows you to control the status of the access control devices' related doors by
the super password of the device.
Before You Start
• Add an access control device to the Mobile Client. See Add Device for Management in User
Manual of Hik-Connect for details.
• Link doors to the access control device. See the user manual of the access control device for
details.
Steps
Note
You can change the super password. See Change Super Password for details.
1. On the device list page, tap the door icon on the right of the access control device to enter the
door control page.
Figure 10-2 The Icon
Represenng Door
DS-K1T804B Series Fingerprint Access Control Terminal User Manual
127