Figure 8-1 Issue a Card by Local Mode
6.
Set other related parameters.
Card Enrollment Staon
Select the model of the connected card enrollment staon.
Note
Currently, the supported card enrollment staon models
include DS-K1F100-D8, DS-K1F100-M, DS-K1F100-D8E, and
DS-K1F180-D8E.
Card Type
This eld is only available when the model is DS-K1F100-D8E
or DS-K1F180-D8E. Select the card type as EM card or Mifare
card according to the actual card type.
Buzzing
Enable or disable the buzzing when the card number is read
successfully.
Card No. Type
Select the type of the card number according to actual
needs.
M1 Card
Encrypon
This eld is only available when the model is DS-K1F100-D8,
DS-K1F100-D8E, or DS-K1F180-D8E. If the card is M1 card,
then you can enable the M1 Card Encrypon funcon and
select the sector of the card to encrypt.
7.
Click OK to
conrm the operaon.
8.
Place the card on the card enrollment staon, and click Read to
get the card number.
The card number will display in the Card No. eld
automacally.
9.
Click Add.
The card will be issued to the person.
8.2.4 Collect Fingerprint via Client
Collecng ngerprints locally means you can collect the
ngerprint via the ngerprint recorder connected directly to the
48