HIKVISION DS-K1T804A Series User Manual

Before You Start
Add at least one person, and set the person's authencaon
mode. For details, see Person Management.
Steps
1.
Move the cursor and select System →
A. Status to enter the
Aendance Status page.
2.
Move the cursor and select
Aendance Mode and set the
aendance mode as Manual and Auto.
Figure 7-17 Manual and Auto Mode
Note
Make sure the aendance status is enabled. By default, it is
enabled.
3.
Press ESC and save the aendance mode.
4.
Move the cursor and select Shortcut Key and dene the
shortcut key's aendance status and schedule.
Note
The aendance status will be valid within the congured
schedule. For example, if set the Up key as check in and the
Down key as check out, and set the check in's schedule as
Monday 08:00, and check out's schedule as Monday 17:00, the
valid person's authencaon before 17:00 on Monday will be
marked as check in. And the valid person's authencaon aer
17:00 on Monday will be marked as check out.
5.
Press ESC and save the sengs.
Result
Enter the inial page, the current aendance mode will be
displayed on the page. If you do not select a status, the
authencaon will be marked as the congured aendance
status according to the schedule. If you press the key on the
keypad, and select a status to take
aendance, the authencaon
will be marked as the selected aendance status.
7.7.4 Disable
Aendance Mode
Disable the aendance mode and the system will not display the
aendance status on the inial page.
Move the cursor and select System → A. Status to enter the
Aendance Status page.
Move the cursor and select Aendance Mode and set the
aendance mode as Disable.
26

HIKVISION DS-K1T804A Series Specifications

General

Brand	HIKVISION
Model	DS-K1T804A Series
Category	IP Access Controllers
Language	English