How long the alarm output will last aer triggered.
4.
Click OK.
5.
Oponal: Set the switch on the upper right corner to ON to
trigger the alarm output.
8.5.2 Congure Remaining Open/Closed
You can set the status of the door as open or closed. For example,
you can set the door remaining closed in the holiday, and set the
door remaining open in the
specied period of the work day.
Before You Start
Add the access control devices to the system.
Steps
1.
Click Access Control → Advanced
Funcon → Remain Open/
Closed to enter the Remain Open/Closed page.
2.
Select the door that need to be congured on the le panel.
3.
To set the door status during the work day, click the Week
Schedule and perform the following operaons.
1) Click Remain Open or Remain Closed.
2) Drag the cursor to draw the me duraon, which means in
that duraon of me, the congured access group is
acvated.
Note
Up to 8 me duraons can be set to each day in the week
schedule.
3) Oponal: Perform the following operaons to edit the me
duraons.
•
Move the cursor to the me duraon and drag the me
duraon
on the meline bar to the desired posion when
the cursor turns to
.
•
Click the
me duraon and directly edit the start/end me
in the appeared dialog.
•
Move the cursor to the start or the end of me duraon and
drag to lengthen or shorten the
me duraon when the
cursor turns to
.
4) Click Save.
Related Operaons
Copy to
Whole Week
Select one duraon on the me bar, click
Copy to Whole Week to copy all the
duraon sengs on this me bar to other
week days.
Delete
Selected
Select one duraon on the me bar, click
Delete Selected to delete this duraon.
Clear Click Clear to clear all the duraon sengs in
the week schedule.
4.
To set the door status during the holiday, click the Holiday and
perform the following operaons.
1) Click Remain Open or Remain Closed.
2) Click Add.
3) Enter the start date and end date.
63
To Next Page
Loading...
Need help?
General
