If the added access control device has been congured with
person informaon (including person details, ngerprint, and
issued card informaon), you can get the person informaon
from the device and import them to the client for further
operaons.
Steps
Note
•
If the person name stored in the device is empty, the person
name will be lled with the issued card No. aer imporng to
the client.
•
The gender of the persons will be Male by default.
•
If the card number or person ID (employee ID) stored on the
device already exists in the client database, the person with
this card number or person ID will not be imported to the
client.
1.
Enter Person module.
2.
Select an
organizaon to import the persons.
3.
Click Get from Device.
4.
Select the access control device from the drop-down list.
5.
Click Get to start
imporng the person informaon to the
client.
The person informaon, including person details, person's
ngerprint informaon (if congured), and the linked cards (if
congured), will be imported to the selected organizaon.
8.2.13 Move Persons to Another
Organizaon
You can move the added persons to another organizaon if you
need.
Before You Start
•
Make sure you have added at least two
organizaons.
•
Make sure you have imported person informaon.
Steps
1.
Enter Person module.
2.
Select an
organizaon in the le panel.
The persons under the
organizaon will be displayed in the
right panel.
3.
Select the person to move.
4.
Click Change
Organizaon.
5.
Select the organizaon to move persons to.
6.
Click OK.
8.2.14 Issue Cards to Persons in Batch
The client provides a convenient way to issue cards to mulple
persons in a batch.
Steps
1.
Enter Person module.
2.
Click Batch Issue Cards.
All the added persons with no card issued will display.
53