4.
Select the correcon date.
5.
Set the check-in/out correcon parameters.
-
Select Check-in and set the actual start-work me.
-
Select Check-out and set the actual end-work
me.
Note
You can click to add mulple check in/out items. At most 8
check-in/out items can be supported.
6.
Oponal: Enter the remark informaon as desired.
7.
Click Save.
8.
Oponal: Aer adding the check-in/out correcon, perform
one of the following
operaons.
View
Click or to view the added aendance
handling informaon in calendar or list mode.
Note
In calendar mode, you need to click Calculate to
get the aendance status of the person in one
month.
Edit •
In calendar mode, click the related label on date
to edit the details.
•
In list mode, double-click the related led in
Date, Handling Type, Time, or Remark column to
edit the
informaon.
Delete Delete the selected items.
Export Export the aendance handling details to local PC.
Note
The exported details are saved in CSV format.
8.9.6 Add Leave and Business Trip
You can add leave and business trip when the employee want to
ask for leave or go on a business trip.
Before You Start
You should add
organizaons and persons in the Person module.
For details, refer to Person Management.
Steps
1.
Click Time &
Aendance → Aendance Handling to enter
aendance handling page.
2.
Click Apply for Leave/Business Trip to enter adding the leave/
business trip page.
3.
Select person from
le list.
4.
Set the date(s) for your leave or business trip.
5.
Select the major leave type and minor leave type from the
drop-down list.
Note
You can set the leave type in Aendance Sengs. For details,
refer to Congure Leave Type.
6.
Set the me for leave.
91