Need help?Do you have a question about the HIKVISION DS-K1T803EF and is the answer not in the manual?
General| Model | DS-K1T803EF |
|---|---|
| Category | IP Access Controllers |
| Operating System | Embedded Linux |
| Camera | 2 MP |
| Fingerprint Capacity | 10, 000 |
| Event Capacity | 100, 000 |
| Fingerprint Module | Optical Fingerprint Module |
| Fingerprint Comparing Mode | 1:1 and 1:N |
| Card Reading Frequency | 13.56 MHz |
| Communication | TCP/IP, RS-485 |
| Wiegand | Wiegand 26/34 |
| Exit Button | 1 |
| Door Contact Input | 1 |
| Input Voltage | 12V DC |
| Working Humidity | 10% to 90% (non-condensing) |
| Weight | 1.2 kg |
| Identification Method | Fingerprint, Card, Password |
| Fingerprint Recognition Duration | <1 second |
| Card Type | Mifare |
| Communication Interface | RS-485 |
| Network Interface | 10/100 Mbps Ethernet |
| Access Control Interface | Wiegand |
| Reader Interface | Wiegand |
| Wiegand Signal Input | Wiegand 26/34 |
| Alarm Output | 2 |
| Power Supply | 12 VDC/1 A |
| Working Temperature | -10°C to 55°C |
| Installation | Wall-mounted |
To Next Page