HIKVISION DS-K1T803MF - Configuring Week Plan

Fingerprint Access Control Terminal
24
4.5.3 Configuring Week Plan
4.5.3.1 Adding Week Plan
Steps:
1. Select Week Plan and press the OK key to enter the Week Plan list interface.
Note: By default, the system contains one week plan, named Week Plan 1.
Week Plan List Interface Figure 4. 42
2. Press the key to enter the New (New Week Plan) interface.
Week Plan Configuration Interface Figure 4. 43
3. Configure the week plan parameters, including the week plan No., the week plan name, the week
plan time and its corresponding periods.
Note: Up to 8 periods can be configured each day.
4. Press the ESC key and select Yes to save the settings and exit the interface.
4.5.3.2 Searching Week Plan
Purpose:
Search the target week plan by entering the week plan name.
Steps:
1. Enter the week plan name in the WK. Plan (Week Plan) list interface.
2. Press the OK key to search.
4.5.3.3 Editing and Deleting Week Plan
Steps:
1. Select a week plan and select Edit in the WK. Plan configuration interface.
Or select a week plan and select Delete in the WK. Plan configuration interface.