Fingerprint Access Control Terminal
23
6. Press the ESC key and select Yes to save the parameters and exit the interface. The configured
holiday group will be displayed in the holiday group list.
4.5.2.2 Searching Holiday Group
Purpose:
Search the target holiday group by entering the holiday group name.
Steps:
1. Enter the target holiday group name in the searching bar.
2. Press the OK key to search.
4.5.2.3 Editing and Deleting Holiday Group
Steps:
1. Select a holiday group and select Edit in the Holiday Group Manage configuration interface.
Or select a holiday group and select Delete in the Holiday Group Manage configuration interface.
Holiday Group Manage Interface Figure 4. 40
2. Edit the holiday group name.
Or select New ACS Holiday to add new holiday schedules.
Holiday Group Interface Figure 4. 41
3. Press the ESC key and select Yes to save the settings and exit the interface.
Or
1) Select a holiday in the holiday list and select Edit in the Holiday Settings interface.
Or select Delete to delete the select holiday.
2) Edit the select holiday according to Section 4.5.2.1 Adding Holiday Group.
3) Press the ESC key and select Yes to save the settings and exit the interface.
To Next Page
Loading...
