Fingerprint Access Control Terminal
22
1. Select Holiday and press the OK key to enter the Holiday Group list interface.
Holiday Group List Interface Figure 4. 37
2. Press the key to enter the Holiday Group interface.
Holiday Group Interface Figure 4. 38
3. Edit the holiday group name.
4. Select New ACS Holiday to enter the New (New Holiday) interface.
Add New Holiday Interface Figure 4. 39
5. Configure the holiday parameters, including the holiday No. the holiday name, the holiday start
time and the end time and the holiday period for the access control devices.
Notes:
Up to 8 periods can be configured.
Press the ESC key and select Yes to save the parameters and exit the interface.
To Next Page
Loading...
