Fingerprint Access Control Terminal
33
2. Select Edit and follow the steps in Section 4.6.3.1 Adding Holiday to edit the holiday information.
Or select Delete and press the OK key to delete the holiday.
3. Press the ESC key and select Yes to save the settings and exit the interface.
4.6.4 Configuring Shift Schedule
Purpose:
Configure the shift schedule by department or by individual.
4.6.4.1 Scheduling Shift by Department
Before you start:
1. Edit the department. For detailed information, see Section 4.6.1 Configuring Department.
2. Configure the normal shift or the man-hour shift. For detailed information, see Section 4.6.2
Configuring Shift.
Steps:
1. Select a target department in the By Dept. (Schedule by Department) interface.
Schedule Shift by Department Figure 4. 62
2. Press the OK key to enter the Schedule Shift by Dept. interface.
Schedule Shift by Dept. Interface Figure 4. 63
3. Move the cursor to Set Shift and press the OK key to enter the Set Shift interface.
1) Select the shift type and the shift times.