HIKVISION DS-K1T803MF - Page 48

Fingerprint Access Control Terminal
34
Set Shift Interface Figure 4. 64
Notes:
 You can set the shift from Monday to Sunday.
 The shift types include None, Normal, and Man-Hour.
2) Press the ESC key and select Yes to save the settings and exit the interface.
4. Set the schedule start time and the end time.
5. Move the cursor to Select Holiday and press the OK key.
Select Holiday Interface Figure 4. 65
1) Select a target holiday.
2) Press the ESC key and select Yes to save the settings and exit the interface.
Notes: The attendance will not be recorded during the holiday.
6. Press the ESC key and select Yes to save the settings and exit the interface.
Note: The department name cannot be edited.
4.6.4.2 Scheduling Shift by Individual
Adding New Individual Shift
Before you start:
1. Add the user. For detailed information, see Section 4.4 User Management.
2. Configure the normal shift or the man-hour shift. For detailed information, see Section 4.6.2
Configuring Shift.
Steps:
1. Press the key to enter the By Individual (Schedule by Individual) interface.