Fingerprint Access Control Terminal
39
Support the USB disk of FAT32 format.
The USB disk memory should be from 1G to 32G. Make sure the USB disk free space is up to
512M.
4.7.1.2 Importing Data
Steps:
1. Insert the USB disk to the USB interface.
2. Press the key to enter the Import interface and select Import ACS Para (Import Access Control
System Parameters).
Import Interface Figure 4. 75
3. Press the OK key to import.
Notes:
Support the USB disk of FAT32 format.
The file for importing should be in the root directory.
4.7.2 Searching Log
Purpose:
You are able to search the event log in the target time duration of the target ID No.
Steps:
1. Enter the ID No. in the Log (Log Search) interface.
2. Move the cursor the Name, the corresponding name will be displayed automatically.
Or enter the name and move the cursor to the ID No., the corresponding ID No. will be displayed
automatically.
Log Search Interface Figure 4. 76
3. Enter the target log start time and the end time.
4. Press the OK key to search. The interface will display the log search result.
To Next Page
Loading...
