Fingerprint Access Control Terminal
103
Searching Control Log
Searching Access Control Logs
Purpose:
The Access Control Log files of the Access Control System include door groups and doors access control
logs and door on/off control log files.
Steps:
1. Open the Log Search page.
2. Select the radio button of Control Logs.
3. Select the operation type as Access Control Logs.
4. Click the icon to specify the start time and end time.
5. Click Search. The matched log files will display on the list.
You can check the operation time, log type and other information of the logs.
Note: Please narrow the search condition if there are too many log files.
Log Search
Purpose:
The Log Search of the Access Control System include informations for configuration log files and control
log files.
Steps:
1. Open the Log Search page.
2. Select the radio button of Control Logs.
3. Select the operation type as Log Search.
4. Click the icon to specify the start time and end time.
5. Click Search. The matched log files will display on the list.
You can check the operation time, log type and other information of the logs.
Note: Please narrow the search condition if there are too many log files.
5.6.2 System Configuration
Purpose:
The general parameters, Auto Time Adjustment and Card Reader of the Access Control System can be
configured.
Click the icon on the control panel to open the System Configuration page.
To Next Page
Loading...
