Fingerprint Access Control Terminal
82
2. You can set the name for the controller and select the card reader as the beginning of the path.
3. In the list, click the text filed of Card Reader Afterward and select the linked card readers.
Example: If you select Reader In_01 as the beginning, and select Reader In_02, Reader Out_04 as
the linked card readers. Then you can only get through the access control system by swiping the card
in the order as Reader In_01, Reader In_02 and Reader Out_04.
4. Check the checkbox of Enable Anti-Passing back.
5. Click and then click to take effect of the new settings.
Note: The attendance device does not support the function.
Attendance Management 5.4
Purpose:
After adding the device and person, you can set the person shift, set the holiday, manage the person
attendance and view the card swiping log.
Click icon on the control panel to enter the Attendance Configuration interface.
5.4.1 Shift Group Management
Purpose:
On the shift group management interface, you can add, edit, and delete shift groups for attendance
management.
Steps:
1. Click the Shift Group tab to enter the following page.
2. Click button to pop up the adding shift group window.
To Next Page
Loading...
