HIKVISION DS-K1T803MF - Page 30

Fingerprint Access Control Terminal
16
Adding User Interface Figure 4. 26
2. Enter the new user name.
1) Press key to enter the editing interface. Press key to shift input mode. Chinese,
Number/Lowercase Letters, Number/Uppercase Letters and symbols are supported.
2) Enter the use name and press the OK key to confirm and exit the interface.
Editing Interface Figure 4. 27
Notes:
 Numbers, uppercase letters, lowercase letters, Chinese characters and symbols are
supported.
 The user name supports up to 32 characters.
 Each user name can be used for once.
3. Enter the card No.
Notes:
 The card No. is required.
 The card No. can start with 0 when it contains more than one numbers. E.g. 012345.