Fingerprint Access Control Terminal
97
Click the icon on the control panel to enter the interface.
Access Anti-control
Purpose:
You can control the status for a single control point (a door) in this section.
Steps:
1. Enter the status monitor page.
2. Click on the icon on the Status Information panel to select a door.
3. Click on the button listed on the upper-left side of the Status Information panel to select a door
status for the door.
: Click on the button to open the door once.
: Click on the button to close the door once.
: Click on the button to keep the door open.
: Click on the button to keep the door closed.
Note: Do not support the Capture function.
4. You can also right click the icon and to select a status for the door.
To Next Page
Loading...
