HIKVISION DS-K3B220LX Series - Set Study Mode via Button; Pair Keyfob via Button

4.4.2 Set Study Mode via Buon
Enter the study mode through buon conguraon to set the closed posion of the device barrier.
Steps
1.
Set the conguraon No. to "1" and the parameter to "2".
The device enters study mode.
2.
Power
o the device and swing the barrier unl it is vercal to the pedestal.
3.
Power on the device.
The device will remember the current
posion automacally.
4.
Reboot the device when you hear "Study accomplished. Please reboot."
4.4.3 Pair Keyfob via
Buon
Pair the remote control to the device via buon to open/close the barrier remotely.
Steps
1.
Set the conguraon No. to "2" and the parameter to "2".
The device enters the keyfob pairing mode.
2.
Hold the Close
buon for more than 10 seconds.
The keyfob's indicator of the will ash twice if the pairing is completed.
3.
Set the
conguraon No. to "2" and the parameter to "1".
The device enters the normal mode.
4.
Reboot the device to take
eect.
DS-K3B220LX Series Swing Barrier
22