HIKVISION DS-PDSMK-S-WE - Enrollment; Enroll Detector Locally; Register Detector via APP; Format Detector

3 Enrollment
1. Log in the Hik-ProConnect, and select a site.
2. Select the AX PRO in the site.
3. Enter“Sengs-System Sengs” , and tap the "Enrollment Mode" buon to make the
AX PRO enter the enrollemnt status.
Enroll the Detector Locally
Register the Detector via APP
1. Log in the Hik-ProConnect, and select a site.
2. Select the AX PRO in the site.
3. Tap the “+” icon on the boom of the page, and scan the QR code to add the peripheral.
4. Turn the power switch of the peripheral on, and it will be automacally enrolled to the control panel.
1
2
3
Locaon and number of smoke alarms may be specified in relevant regulaons. Where these do not exist, the requirements of DIN 14676 can be used.
Before commencing installaon, ensure all equipment and tools to mount and test the device are available, such as drills, mounng screws (supplied), cables
and ladders.
According to German applicaon standard DIN 14676
Locaon Selecon
Equipment
Installaon
2
1
4
BEDROOM
CHILDREN’S
BEDROOM
CHILDREN’S
BEDROOM
LIVING ROOM
BATH-
ROOM
KITCHEN
Figure 1 a) Example of the applicaon in a flat
xxxx
Device
Hold the coding buon and power the detector on at the same me. The detector will be formaed aer 8 s.
Format