HIKVISION DS-PK1-LRT-HWB - Bypass and Restore Zones; Network Management; Query Device Status

Wired Keypad • Operation Command
4
Note:
Only the installer has lock and unlock permissions.
When locked, you can only enter the settings page by【Password】+【 】.
Bypass/Restore Bypass
1. Select Bypass, and select zones. Confirm by # key
2. Select Bypass Restored, and select zones. Confirm by # key.
Network Management
1. Select LAN, Wi-Fi, Cloud or Cellular Network, and confirm by # key.
2. Disable DHCP by # key, and configure network parameters.
Query
Enter password and press to check device status.
Select Control Panel Status, Zone Status, Peripheral Status or Area Status to see faults and status.
Select Control Panel Info to see model, serial number and version of the control panel.
Select Keypad Info to see model, serial number, version, bus address and bus status.