+44(0)333 444 1280 (UK) customer.support@pyronix.com (UK) www.pyronix.com Pyronix Limited, Pyronix House, Braithwell Way, Hellaby, Rotherham, S66 8QY, UK
DIGI Wi-Fi with External Antenna
RINS1963-2
EN 50136-1: 2012
EN 50136-2: 2013
CLC/ TS 50136-9: 2013
SP5 (Single Path)
Environmental Class (EC) II
EN
1 2
3
Partcode: DIGI-WIFI/XA
Product information
Applies to electrical products sold within the European community. At the
end of the electrical product’s life, do not dispose of it with household
waste. Where possible, recycle the product. Check with your Local
Authority or retailer for recycling advice in your country.
Warranty
This product is sold subject to our standard warranty conditions and is
warranted again defects in workmanship for a period of two years. In the
interest of continuing care and design, Pyronix Ltd reserves the right to
amend specifications without giving prior notice.
LED colours
Red, amber and green
Operating voltage
~9-16V DC
Operating current
30mA
Storage temperature
-40°C to +80°C
Operating temperature
-10°C to +40°C
Specifications
22mm
110mm
116mm
For Future
Use
EURO 46
PCX 46
56mm
Dimensions
See for dimensions of module and external antenna. Antenna comes with
a 1m wire from antenna to MMCX connector.
LEDS
No connection Cloud connected App connected
During set-up Network traffic
Installation
Follow steps 1 to 3 to install and connect the module to the board. In step
3, make sure not to attach the antenna to the metal case.
Communication loom Power External antenna
It is important to use the right communication loom (white loom) when
connecting the module to the panel. For EURO use the 8 way loom and for
the PCX use the 6 way loom.
EURO 46
PCX 46
To Next Page
Need help?
General
