1
TABLE OF CONTENTS
GENERAL INFORMATION – PAGES 3 - 6
General information, first step recommendations and case dimensional drawings.
THE USE OF CASTERS – PAGE 7
LINE-UP – PAGES 8 - 9
An eleven step procedure for initial case lineup with illustrations.
TRIM-OUT – PAGES 10 - 11
An eleven step procedure for trimming out cases with illustrations.
REFRIGERATION PIPING – PAGE 12
Coil outlet locations, refrigeration components location, and other piping tips with
illustrations.
PLUMBING – PAGE 13
Information on drain connections.
ELECTRICAL HOOKUP AND WIRING DIAGRAMS – PAGES 14 - 18
Complete information on electrical connections.
CASE OPERATION – PAGE 19
Recommended settings for all case controls.
DEFROST AND TEMPERATURE CONTROL – PAGE 20
Defrost data and sensor bulb locations.
AIRFLOW & PRODUCT LOADING – PAGE 21
Air flow and load limits
USE AND MAINTENANCE – PAGES 22 - 23
Cleaning, and fan information
PARTS ORDERING – PAGES 24 - 26
Replacement parts identification
PRODUCT WARRANTY - Inside Back Cover
To Next Page
