Hillstreet Beds Geneva Futon 1454 User Manual

PG - 1
UNLESS OTHERWISE STATED, PLEASE DO NOT TIGHTEN BOLTS (AND/OR) SCREWS UNTIL UNIT
IS COMPLETELY ASSEMBLED ON A FLAT SURFACE.
Examine all packaging material for small parts that may have come loose during shipment. Periodic
checks are recommended to insure that all components are in proper position, tight and free from
damage. Keep this assembly instruction for future reference.
Adult assembly required.
G ENEVA F UTON
MODEL #1454 Black
MODEL #1662 Matte White
PARTS LIST
(1) Back Mattress Support Frame
(1) Bottom Mattress Support Frame
(1) Rear Cross Rail
(1) Freont Cross Rail
(with center support)
(1) Right Side Panel
(1) Left Side Panel
(1) Left Futon Hinge
(1) Right Futon Hinge
ASSEMBLY
INSTRUCTIONS
TOOLS REQUIRED
FOR ASSEMBLY
Allen Wrench
(Included)
Phillips Screwdriver
(Not Included)
DATE: 5/15/98
A
B
C
D
E
F
G
H
HARDWARE NOT
DRAWN ACTUAL SIZE
HARDWARE LIST
(2) Frame Hooks
(8) Short Allen Bolts
(8) Small Hex Nuts
(16) Metal Washers
(4) Short Allen Bolts
(Large Diameter)
(4) Large Metal Washers
(4) Lock Washers
(4) Large Hex Nuts
(1) Allen Wrench
(8) Long Allen Bolts
I
K
L
M
N
O
P
Q
R
S
I
L
K
M
O
N
P
A
B
C
F
E
H
G
D
HILLSTREET BEDS, LLC.
IMPORTANT
Q
R
S

Hillstreet Beds Geneva Futon 1454 Specifications

General

Brand	Hillstreet Beds
Model	Geneva Futon 1454
Category	Indoor Furnishing
Language	English

Summary

Geneva Futon Assembly Instructions

Important Assembly Guidelines

Read critical assembly guidelines before starting to ensure correct setup and avoid damage.

Parts and Hardware Identification

Identify all included parts and hardware before beginning the assembly process.

Tools Required for Assembly

List of tools needed to assemble the Geneva Futon, including included and required items.

Assembly Step 1: Attach Hinges

Step 2: Attach Cross Rails

Secure the rear and front cross rails to the side panels using bolts and washers.

Assembly Step 3: Attach Mattress Support Frames

Step 4: Insert Frame Hooks

Insert frame hooks into the designated holes on both mattress support frames.

Step 5: Final Tightening and Step 6: Place Mattress

Tighten all hardware and place the futon mattress onto the support frames.

Care and Maintenance

Instructions on cleaning and maintaining the finish of the Geneva Futon.