hillvert HT-BC-800 User Manual

178 pages

Go to English

To Next Page

expondo.com

BRUSH

CUTTER

Bedienungsanleitung

User manual

Instrukcja Obsługi

Návod k použití

Manuel d´utilisation

Istruzioni per l‘uso

Manual de instrucciones

Használati útmutató

Brugsanvisning

USER MANUAL

Questions and Answers:

N
Nancy FosterAug 5, 2025
Why my hillvert HT-BC-800 failing to start?
- T
  Terry MckenzieAug 5, 2025
  If your hillvert Brush Cutter is failing to start, several factors could be the cause. You might be using incorrect fuel, in which case you should drain the current fuel and replace it with the correct type. Another potential issue is a clogged fuel filter, which requires cleaning. Additionally, the spark plug could be fouled or wet, or the plug gap might be incorrect; in this case, clean or dry the spark plug and correct the gap to 0.6~0.7mm. Finally, ensure the spark plug is properly connected and retighten it if necessary.
C
Chad KennedyAug 20, 2025
What to do if my hillvert HT-BC-800 Brush Cutter engine starts but does not keep running?
- T
  Timothy CervantesAug 20, 2025
  If your hillvert Brush Cutter's engine starts but doesn't keep running, or if you're having hard time restarting it, the issue might be due to several reasons. It could be due to incorrect or stale fuel, in which case you should drain the old fuel and replace it with the correct fuel. Another possibility is carbon build-up, which requires wiping it away. Also, check for dust clogs and wash or clean them as needed.

hillvert HT-BC-800 Specifications

General

Engine Type	2-stroke
Engine Displacement	51.7 cm³
Fuel Tank Capacity	1.2 L
Cutting Width (Blade)	25.5 cm
Cutting Width (Line)	42 cm

Summary

General Description

Usage Safety

Safety in the Workplace

Keep the work area tidy and well lit. Use common sense and watch what you are doing.

Personal Safety

Do not operate if tired or under influence. Use PPE and maintain balance. Keep away from moving parts.

Safe Device Use

Ensure ON/OFF switch works. Keep devices out of reach of children. Check for damage before use.

Warnings concerning works with flammable materials

Device uses mixed fuel. Do not store fuel near heat/fire. Ensure engine is off and cool before refuelling.

Use Guidelines

Device Description

Identifies key parts of the brush cutter, including gearbox, blade guard, shaft, and fuel tank.

Assembling the Device

Step-by-step guide for assembling the engine, clutch cover, and handhold of the brush cutter.

Preparing for Use

Balance the Unit

Adjust harness for equal load on shoulders. Balance the unit with head off the ground.

Device Use

Working Plan

Plan work schedule, allow rest. Limit continuous use to 30-40 mins. Avoid use when impaired.

Maintenance

Related product manuals

hillvert HT-HBC-500

224 pages