hilscher CIFX 50-XX - User Manual

65
User Manual
PC Cards cifX
PCI (CIFX 50-XX, CIFX 50-2XX, CIFX 50-2XX\XX)
PCI Express (CIFX 50E-XX)
Low Profile PCI Express (CIFX 70E-XX, CIFX 100EH-RE\CUBE)
Installation, Operation and Hardware Description
Hilscher Gesellschaft für Systemautomation mbH
www.hilscher.com
DOC120204UM39EN | Revision 39 | English | 2014-01 | Released | Public

Summary

1 Introduction

1.1 About the User Manual

Provides descriptions of installation, operation and hardware of PC Cards cifX.

2 Safety

2.3 Personnel Qualification

Details the required qualifications for installing and operating PC Cards cifX.

2.4 Safety Instructions to avoid Personal Injury

Instructions to prevent personal injury during installation and operation.

2.4.1 Electrical Shock Hazard

Warns about the dangers of electrical shock.

2.5 Safety Instructions to avoid Property Damage

Instructions to prevent property damage and device destruction.

2.5.1 Device Destruction by exceeding allowed Supply Voltage

Details how to avoid device destruction from incorrect supply voltage.

2.5.2 Device Destruction by exceeding allowed Signaling Voltage

Details how to avoid device destruction from incorrect signaling voltage.

2.5.3 Electrostatically sensitive Devices

Safety precautions for handling ESD-sensitive devices.

3 Descriptions and Requirements

3.5 The Function Slot Number (Card ID)“

Explains setting the slot number using the rotary switch.

3.6 The Function DMA Mode“

Details on activating and using DMA mode.

3.8 System Requirements

Details system requirements for PC Cards cifX.

3.8.1 Slot for the PC Cards cifX PCI, PCIe and Low Profile PCIe

Specifies the required PCI/PCI Express slots.

3.8.2 Power Supply and Host Interface

Details power supply and host interface requirements.

3.9 Requirements for Operation of the PC Card cifX

Lists requirements for proper operation of PC Cards cifX.

4 Getting Started

4.1 Installation and Configuration PC Card cifX

Describes steps for software and hardware installation and configuration.

4.5 Update for Firmware, Driver and Software

Guide for updating firmware, drivers, and software.

6 Hardware Installation and Uninstalling

6.1 Safety Messages on Personal Injury

Safety instructions to avoid personal injury during installation/uninstallation.

6.1.1 Electrical Shock Hazard

Warnings about the hazard of lethal electrical shock.

6.2 Property Damage Messages

Safety messages to prevent property damage and device destruction.

6.2.1 Device Destruction by exceeding allowed Supply Voltage

Instructions to prevent device destruction due to supply voltage.

6.2.2 Device Destruction by exceeding allowed Signaling Voltage

Instructions to prevent device destruction due to signaling voltage.

6.2.3 Electrostatically sensitive Devices

Precautions for handling ESD-sensitive devices.

6.4 Installing PC Card cifX PCI, PCIe, Low Profile PCIe

Step-by-step guide for installing PC Cards cifX.

6.5 Uninstalling the PC Card cifX PCI, PCIe, Low Profile PCIe

Step-by-step guide for uninstalling PC Cards cifX.

7 Troubleshooting

7.1 Instructions for Problem Solving

General instructions and steps for troubleshooting issues.

8 LED Descriptions

8.1 Overview LEDs Real-Time Ethernet Systems

8.2 Overview LEDs Fieldbus Systems

8.3 System LED

Details the meaning and states of the System LED.

8.4 EtherCAT Master

Describes LEDs for EtherCAT Master protocol.

8.5 EtherCAT Slave

Describes LEDs for EtherCAT Slave protocol.

8.6 EtherNet;IP Scanner (Master)

Describes LEDs for EtherNet/IP Scanner (Master) protocol.

8.7 EtherNet;IP Adapter (Slave)

Describes LEDs for EtherNet/IP Adapter (Slave) protocol.

8.8 Open Modbus;TCP

Describes LEDs for Open Modbus/TCP protocol.

8.9 POWERLINK Controlled Node;Slave

Describes LEDs for POWERLINK Controlled Node/Slave protocol.

8.10 PROFINET IO-Controller

Describes LEDs for PROFINET IO-Controller protocol.

8.11 PROFINET IO-Device

Describes LEDs for PROFINET IO-Device protocol.

8.12 sercos Master

Describes LEDs for sercos Master protocol.

8.13 sercos Slave

Describes LEDs for sercos Slave protocol.

8.14 VARAN Client (Slave)

Describes LEDs for VARAN Client (Slave) protocol.

8.15 PROFIBUS DP Master

Describes LEDs for PROFIBUS DP Master protocol.

8.16 PROFIBUS DP Slave

Describes LEDs for PROFIBUS DP Slave protocol.

8.17 PROFIBUS MPI Device

Describes LEDs for PROFIBUS MPI Device protocol.

8.18 CANopen Master

Describes LEDs for CANopen Master protocol.

8.19 CANopen Slave

Describes LEDs for CANopen Slave protocol.

8.20 DeviceNet Master

Describes LEDs for DeviceNet Master protocol.

8.21 DeviceNet Slave

Describes LEDs for DeviceNet Slave protocol.

8.22 AS Interface Master

Describes LEDs for AS Interface Master protocol.

8.23 CC-Link Slave

Describes LEDs for CC-Link Slave protocol.

9 Device Connections and Switches

9.7 Rotary Switch for Slot Number (Card ID)

Explains the function and use of the rotary switch for slot number.

9.7.1 Set Slot Number (Card ID)

Instructions on how to set the slot number.

10 Technical Data

10.1 Technical Data PC Cards cifX

Presents technical data for various PC Cards cifX.

10.4 Technical Data of the Communication Protocols

10.4.1 EtherCAT Master

10.4.2 EtherCAT Slave

10.4.3 EtherNet;IP Scanner (Master)

10.4.4 EtherNet;IP Adapter (Slave)

10.4.5 Open Modbus;TCP

10.4.6 POWERLINK Controlled Node;Slave

10.4.7 PROFINET IO-Controller

10.4.8 PROFINET IO-Device (V3.4)

10.4.9 PROFINET IO Device (V3.5)

10.4.10 sercos Master

10.4.11 sercos Slave

10.4.12 VARAN Client (Slave)

10.4.13 PROFIBUS DP Master

10.4.14 PROFIBUS DP Slave

10.4.15 PROFIBUS MPI

10.4.16 CANopen Master

10.4.17 CANopen Slave

10.4.18 DeviceNet Master

10.4.19 DeviceNet Slave

10.4.20 AS-Interface Master

10.4.21 CC Link Slave

hilscher CIFX 50-XX Specifications