How to properly use the BackSaver:
• The BackSaver is for horizontal drilling
only.
• Make sure the BackSaver is used with
both hands.
• Ensure the adjustable knee pad is placed
on the thigh in a comfortable position.
Right above the knee is generally the
optimal location for the knee pad.
• Place the drill bit at the desired location
and apply pressure using the knee pad.
• Do not pull the lever until the drill is
firmly pressed against the concrete.
• To drill accurately, make sure the
BackSaver and drill are level.
• Once drilling is complete, make sure the
drill is engaged while retracting from the
hole.
• Release the lever immediately once the
drill is removed from the hole.
13
To Next Page
Loading...