What to do if Hilti DST WRC-CA Remote Control unit doesn't respond to inputs?
If the Hilti Remote Control unit or the screen isn't responding, it might be due to a software fault. Try switching off the electricity supply to both the remote control unit and the partner device, then restart them.
How to fix a Hilti DST WRC-CA Remote Control that refuses to switch on?
If your Hilti Remote Control unit refuses to switch on or the screen remains dark, it could be due to a discharged battery. You can try the following: - Change the battery and charge the empty battery. - Work with the remote control cable.
General| Brand | Hilti |
|---|---|
| Model | DST WRC-CA |
| Category | Remote Control |
| Language | English |
Read this documentation before initial operation or use for safe handling.
Explains the meaning of signal words and symbols used in the document.
Explains text markings like bold uppercase letters for buttons and chevrons for settings.
Refers to labels and plates on the product, such as the Cut Assist feature indicator.
States that Hilti products are for professional use by trained personnel and where to find type/serial numbers.
Declares compliance with applicable directives and standards; indicates where documentation is filed.
Provides essential safety advice for operating power tools, covering work area, electrical, and personal safety.
Specific safety precautions for handling and using the remote control unit.
Instructions for safe transportation, storage, and use of Li-ion batteries.
Identifies and labels the main components of the remote control unit and battery.
Explains the various elements displayed on the remote control unit's screen and status bar.
Defines the product's purpose as a remote control for Hilti products and specifies compatible batteries and chargers.
Describes the Cut Assist technology for automating work steps in sawing operations.
Explains how to use the joystick to control the direction of advance for the saw.
Details the functions of the control knob for setting drive parameters and selecting options.
Explains the function and use of the emergency stop button for safety.
Describes the function of the ON/OFF, DRIVE ON/OFF, and HOME buttons.
Explains the softkey function buttons on the sides of the display.
Lists various settable parameters accessible via the settings menu.
Describes functions accessed via double chevrons, such as settings and settings with control knob.
Lists all components included in the DST WRC-CA package.
Provides technical specifications for the remote control unit, including voltage, protection class, weight, and dimensions.
Details the wireless communication parameters like frequency band, transmission power, and range.
Technical specifications for the PUA 81 charger, including voltage, power, and operating temperatures.
Technical specifications for the PRA 84 Li-ion battery, including voltage, capacity, and charging time.
Technical specifications for the PRA 84 G Li-ion battery, including voltage, capacity, and charging time.
Lists the available interfaces on the unit, such as USB and remote control cable socket.
Specifies EMC directive requirements related to the supply network's short-circuit power.
Step-by-step instructions for safely removing the battery from the remote control unit.
Instructions on how to connect and charge the battery using the provided charger.
Step-by-step instructions for correctly inserting the battery into the remote control unit.
Guides on how to pair the remote control unit with a partner device for operation.
Instructions for configuring language, country, and measurement units on the device.
Details on how to set the line fuse rating and line attenuation for the electricity supply.
Instructions for adjusting parameters related to cutting operations.
Information on managing saw blade and blade guard data records.
How to enable or disable manual or automatic cooling water control.
Steps to change the device password and instructions if the password is forgotten.
How to adjust the brightness of the device's display screen.
Procedure for setting the current date and time on the remote control unit.
Instructions on how to access and view stored messages on the device.
How to view logged operating hours in manual and assisted modes.
Accessing information on operating hours, service intervals, and serial/version numbers.
Steps to reset the remote control unit to factory default settings.
General explanation of manual mode cutting where the operator makes all settings.
Detailed steps for performing cuts using the wall saw in manual operation mode.
Introduction to the Cut Assist function and its role in automating sawing tasks.
Step-by-step guide for performing cuts using the assisted Cut Assist function.
Procedures for pausing or completely stopping an ongoing assisted cut.
Instructions for safely changing the saw blade during a Cut Assist operation.
Process for adjusting the blade guard when an obstacle is detected during Cut Assist.
General cleaning and maintenance instructions for the tool itself.
Specific instructions for cleaning and caring for the Li-ion batteries.
Regular checks, fault reporting, and post-maintenance procedures.
Safety precautions and procedures for transporting the tool and batteries.
Guidelines for storing the tool and batteries safely to prevent damage and unauthorized access.
Table listing common problems, their possible causes, and recommended actions.
Guidance on proper disposal of Hilti tools and appliances for recycling.
Specific instructions and warnings regarding the safe disposal of batteries.
Information on how to inquire about warranty conditions with the local Hilti representative.
To Next Page