Hilti PSA - Page 19

*2004955*
2004955 English 13
3 Description
3.1 Accessories 1
@
Battery PSA 81
;
AC adapter PUA 81
=
Battery PSA 82
%
Charger PSA 85
&
Battery PSA 83
(
PUA 82 motor vehicle power adapter
)
AC adapter PUA 85 19V
+
Battery PSA 80
§
PUA 86 19V motor vehicle power adapter
/
Charger PSA 86
3.2 Intended use
Use the PSA 80 only to power the Hilti PS 200 S Ferroscan and the PS 200 M monitor. Charge the PSA 80
battery with the PSA 86 charger.
Use the PSA 81 battery only to power the Hilti PS 1000 X-Scans. Charge the PSA 81 (05 und 06) with the
PUA 85 19V or PUA 81 AC adapter.
Use the PSA 82 battery to power the Hilti PSA 100 monitor. Charge the battery in the device using the
PUA 81 AC adapter or the PUA 82 motor vehicle power adapter. Alternatively, you can use the PSA 85
charger to charge the PSA 82 battery when it is not in the device.
Use the PSA 83 battery to power the Hilti PSA 200 tablet. Use the PUA 85 19V AC adapter to charge the
battery while it is installed in the device.
Use the PSA 85 charger to charge the PSA 82 battery.
Use the PSA 86 charger to charge the PSA 80 battery.
Use the PUA 81 AC adapter to charge the PSA 81 (01, 02 and 05) battery, the PSA 82 battery when it is in
the PSA 100 monitor (when switched off or in operating mode) and the PRA 84 battery.
Use the PUA 82 motor vehicle power adapter to charge the PSA 81 (01, 02 and 05) battery, the PSA 82
battery when it is in the PSA 100 monitor (when switched off or in operating mode) and the PRA 84 battery.
Use the PUA 85 19V AC adapter to charge the PSA 81 (05) battery and to charge the PSA 83 battery in the
PSA 200 tablet.
Use the PUA 86 19V motor vehicle power adapter to charge the PSA 81 battery (05) and to charge the
PSA 83 battery in the PSA 200 tablet.
3.3 Foreseeable faults
Do not use the PUA 85 19V to charge the PSA 81 battery (01 and 02).
Do not use the battery as a power source for other unspecified appliances.
Do not use the device where there is a risk of fire or explosion.