What to do if 1 LED flashes and my Hilti Flood Light doesn't work?
If one LED is flashing and your Hilti Flood Light isn't working, it could be due to one of two reasons: * The battery may be discharged. If this is the case, replace the discharged battery with a charged one. * The battery might be too hot or too cold. Let the battery gradually reach room temperature by cooling down or warming up.
Why doesn't the battery engage with an audible double click in my Hilti Flood Light?
If the battery of your Hilti Flood Light doesn't engage with an audible double click, the retaining lugs on the battery might be dirty. You should clean the retaining lugs and push the battery in until it engages properly.
What to do if 1 LED flashes on Hilti SL 6-A22 Lighting Equipment and it doesn't work?
If 1 LED flashes and the device does not work, it could be due to a discharged battery. In this case, change the battery and charge the empty one. Alternatively, the battery might be too hot or too cold. Allow the battery to cool down or warm up slowly to room temperature.
Why doesn't the battery engage with an audible double click in my Hilti Lighting Equipment?
The battery may not engage with an audible double click because the retaining lugs on the battery are dirty. To resolve this, clean the retaining lugs and push the battery in until it engages.
What to do if 1 LED flashes on my Hilti Work Light and it doesn't work?
If 1 LED flashes and your Hilti Work Light isn't working, it could be due to a discharged battery. Try replacing the battery and charging the empty one. Alternatively, the battery might be too hot or too cold. In this case, allow the battery to gradually cool down or warm up to room temperature.
Why doesn't the battery engage with a double click on my Hilti Work Light?
If the battery isn't engaging with an audible double click on your Hilti Work Light, the retaining lugs on the battery might be dirty. Clean the retaining lugs and then push the battery in until it engages properly.
Guidelines for safe operation, handling, and product maintenance.
Specifies necessary personal protective equipment for safe use.
Instructions for the safe handling, charging, and storage of batteries.
Essential steps and precautions before operating the product.
Step-by-step guide for correctly installing the battery.
Instructions on how to safely detach and remove the battery.
A guide to diagnose and resolve common issues with the product.
General| Weight | 0.8 kg (without battery) |
|---|---|
| Battery type | Li-ion |
| Light Source | LED |
| Light output | 1000 lumens |
| Protection class | IP54 |
| IP protection class | IP54 |
| Luminous Flux | 1000 lumens |
| Runtime | Up to 4 hours |
| Battery Voltage | 22V |
To Next Page
