What to do if the Himimi HZB-12/A Ice Maker's “ADD Water” indicator is on?
If the “ADD Water” indicator is illuminated, it signifies a lack of water. To resolve this, stop the ice maker, add water, and then press the “ON/OFF” button to restart the unit.
What to do if the Himimi HZB-12/A Ice Maker's “Ice Full” indicator is on?
If the “Ice Full” indicator is on, it means the ice basket is full. Remove the ice from the basket. If you want the unit to continue making ice for 10 cycles even with the indicator on, continuously press the “Select” button for 5 seconds.
Why are ice cubes sticking together in my Himimi Ice Maker?
Ice cubes may stick together due to a couple of reasons: either the ice-making cycle is too long, or the water temperature in the inner tank is too low. To fix this, you can stop the ice maker, wait for the ice blocks to melt, and then restart it, selecting the small ice cube size. Also, replace the water, ensuring its temperature is between 40°F and 90°F.
What to do if my Himimi Ice Maker cycle is normal but no ice is formed?
If the ice making cycle appears normal but no ice is forming, it could be due to a few reasons. The room temperature or the water temperature in the inner tank might be too high. The room temperature should be between 50°F and 105°F, and the water temperature should be between 40°F and 90°F. It is also possible that the refrigerant in the cooling system is leaking or that a pipe in the cooling system is blocked, in which case you should have it verified by a qualified technician.
Lists and identifies the main components of the ice maker unit.
Details the functions and indicators of the ice maker's control panel.
Steps for removing packaging and preparing the unit before use.
Instructions for safely connecting the ice maker to a power source.
Procedures for cleaning the interior and exterior of the ice maker.
Provides the circuit diagram for the main control and operation boards.
To Next Page
General