◆ Headlight & Front Fender (5mm Hex Wrench & 10mm Wrench)
The headlight and front fender are both secured by a single bolt, so the front fender must be installed together with the headlight. If you prefer not to have a
front fender, you may install the headlight by itself.
Loosen the bolt on the fork brace. Align the bolt holes of both your headlight and the front fender together with the hole on the fork brace, then
reinsert the bolt through all holes and tighten the bolt with a 10mm wrench and a hex wrench.
Step 1:
12
To Next Page
Loading...
